WELCOME TO ENERGEN
NERGY MANAGEMENT NERGY MANAGEMENTFind out how you can reduce your energy bills and become energy efficient with our top energy saving tips.
Install energy efficient lights. Compact fluorescent and LED products that use 80% less energy could replace conventional lamps. Also, because these lights generate less heat, they put less strain on your air conditioning systems.
Use time switches or daylight photocell controls to control lights outside trading hours. Many retailers leave lights on throughout the night for security reasons. Lighting control ensures they switch off the next morning.
Upgrade lights throughout the store. Quite often the public front-of-house lighting is upgraded but back of house (such as store areas and offices) are neglected. Also consider motion detectors to control lights, and utilise energy efficient lamps or LEDs.
Replacement of current fittings with their energy efficient equivalent. This will decrease your lighting bill by at least 70%
Are there areas in your business, where lights are left on unnecessarily for long periods of time ? This could be costing you hundreds, or even thousands of euros per year. Lighting sensors are the answer. The sensor will only allow lights to come on when the area is occupied, and can be adjusted to allow lights to stay on for a suitable time of your choice.
Encourage individuals to turn down the thermostatic radiator valves in their rooms.
Ensure that your radiator circuit is weather compensated to reduce overheating. If overheating occurs, make sure that the heat is turned down rather than opening the windows.
Avoid using supplementary electric heaters. These are one of the most expensive heat sources to run.
Use window blinds. Closing window blinds at night or in the early evening can help reduce heat loss.
At this moment in time, ESB Networks control the exact times that your storage heating turns on and off. There can be significant savings with the installation of a consumer time clock, ie 10% savings can be made just by switching off your storage heating on a Saturday night.
Heating and air conditioning can account for over 40-60% of your energy use. A few simple modifications can reduce this:
If you have more than one boiler, you may be able to turn one off in summer to cut water heating costs.
In winter, do not be tempted to overheat your store, switch off heating when a temperature of 19°C has been reached. Reducing the temperature by just 1°C can cut fuel consumption by 8%, according to the Carbon Trust.
Try shutting down the heating or air conditioning an hour before closing. Staff and customers are unlikely to notice the difference in that time.
Ensure that any entrance overdoor heaters or air curtains are switched off outside trading hours. Fit a time switch if necessary.
Ensure heating, ventilation and extraction controls match your trading hours and do not run unnecessarily out of these hours.
When considering replacement units, think about choosing those that are energy efficient. Depending upon use, the energy savings of an efficient unit can soon outweigh any additional capital costs – typically recouping the difference in less than 12 months. Ideally, also consider units that have clear doors or that can accommodate night blinds.
Avoid setting temperatures too low.
Check the seals on your fridges, freezers and cold rooms.
Turn fridges off after hours if they store only non-perishable goods such as carbonated drinks.
Where illuminated cabinets have the facility to switch off lights, switch lamps off out of hours. This reduces energy for the lamps and for chilled cabinets, and reduces the energy used to keep the cabinet cool.
Encourage your staff to switch equipment off when it is not in use. Even in standby mode, your equipment still consumes energy.
Use the energy saving features of modern IT equipment.
Do not overheat hot water. A temperature of 65°C is ideal:
65˚C provides comfortable hot water and is hot enough to kill legionella bacteria.
Consider fitting spray water taps, as they use less hot water and energy.
Make sure that leaking taps are repaired promptly.
Ensure that pipework is well insulated.
Install self-adhesive thermal strips around doors and windows to reduce draughts. In many buildings, draughts account for up to 10% of heat loss.
Fit automatic closures on external doors.
Apply daylight sensors to lights in order to maximise the use of daylight.
Install variable-speed drives. These can reduce the running costs of fans and pumps by up to 30%.
Ensure air recycling is optimised, particularly at times of low occupancy.
When investing in new equipment, consider high efficiency equipment for your heating, ventilation and air conditioning system. In many instances, the additional cost of energy efficient equipment is soon recouped through
additional energy savings.
Install variable-speed drives. These can reduce running costs when used for fans and pumps.
Invest in high-efficiency motors. These will also help you to reduce your energy consumption.
Maintain motor systems. Lubricate them where appropriate, and check belt tightness and alignment.